欢迎光临
手机网站|联系我们:0419-3136556
辽阳慧特仪表有限公司主营:ALN-111-2料位仪,ZCHJ重锤式料位计,FGL射频导纳 ,RF射频导纳料位计,ZXK阻旋式料位计

辽阳慧特仪表有限公司

站内搜索
联系我们
电  话: 0419-3136556
传  真: 0419-3125858
手  机: 13342333488
13364190055
网  址: www.ly-yb.com.cn
联系人: 杨小姐
邮  箱: [email protected]
地  址: 辽阳市太子河区荣兴路中段百弘亿拓工业城一期5号厂房
公司动态
ALN Series Capacitance Type Level Switch Product instruction
2016-03-15
Specification:
  1. Power supply: 220VAC/ 105VAC, 24VAC/24VDC
  2. Contact Capacity: 250VAC/ 10A, DC30V/10A, SPDT
  3. Power: 4.5VA
  4. Time delay: 0-10S Adjustable
  5. Protection grade: IP65
Micro signal:lzh2014-0425

Working Principle:

The ALN series capacitance type level switch uses the probe of the level switch and the bucket wall as the two plates of the capacitor, when the medium between the two plate changes, so does the capacitance. The special analysis and treatment unit of the level switch examines the range of changment. When the change value up to the set value of the switch, then it transfers to the switch signal to output for the control using and reflects the measured medium or the height of the liquid interface.

Micro signal:lzh2014-0425


Installation Instruction:
  1. Please make sure that if the power supply, the connecting liquid material are
fit for the field requirement when installation, stop installing and connect with us if there is something wrong.
 
  1. Please pay attention to protection when install the covering probe to avoid
the external protective coating cracking.
 
  1. The wire leaded-in from the electric interface and joint stablely matching the
indication on the terminal.
(Note: 220VAC/ 105VAC voltage matches different wiring terminals, it must be not connected wrong or the product will burn out and lead the safty accident!)

Micro signal:lzh2014-0425

Adjustment Instruction:
  1. Indicator light instruction: when the indicator light is normal is that the probe
has measured the material and the light is red, when there is no material left, the light turn off, not the signal of electric power.
 
  1. Coarse adjustment(adjusting when the van is empty or the probe does not
touch the material): adjust the SENSITIBITY ADJ knob to the maximum sensitivity(the white signal linepoint to the H), then use the small straight screwdriver to adjust the COARSE knob until the INDICATOR just turn on. Then closewise adjust the SENSITIBITY ADJ knob, if the indicator light turn off before the SENDITIVITY ADJ point the 92 scale division, then finish the coarse adjustment, if the indicartor light can not turn off, please repeat the operation above.
 
  1. According to the property of the material, closewise adjust the SENSITIVITY
ADJ knob to a suitable position. (normally about 75 scale division)
 
  1. Time-delay adjustment: when the probe has measured the changement of
the material, no matter there is a time delay or not,the indicator light will make a changement immediately (turn on or turn off), but the relay output will not change right now, it only changes according to the time delay when the setted time up.
Micro signal:lzh2014-0425


Packing list:
  1. Capacitance type level switch (the quantity and the delivery expense are accordant);
  2. One copy of the product instruction;
  3. One copy of manufacturer certificate;
  4. Delivery order.
 
Micro signal:lzh2014-0425
辽阳慧特仪表有限公司
联系人:杨小姐   联系电话:0419-3136556   手机:13342333488 13364190055   传真:0419-3125858   联系地址:辽阳市太子河区荣兴路中段百弘亿拓工业城一期5号厂房
辽ICP备10001827号-2   技术支持:谷瀑环保   管理入口
活塞vs开拓者前瞻
重庆时时开奖官方同步 棋牌注册秒送18元 重庆时时开彩结果 500彩票计划助手下载 qq分分彩大小在线计划 北京pk10十码走势图 计算器足球胜平负 a6娱乐平台官方网 2018炸金花下载大全 传奇娱乐app 二八杠生死门演示 爱彩人怎么样 新强时时彩票开奖 彩93彩票平台怎么样 极速时时计划 欢乐斗地主怎么跟好友玩